JBL PRX710 10" PA Speaker Bundle Including Stands
JBL PRX710 10" PA Speaker Bundle Including StandsDetails
The PRX710 is a two-way active PA speaker offering oustanding audio reproduction and dependable reliability. The PRX700 Series represent an evolutionary step in the efficient use of amplifier power, rugged durability and enhanced versatility in a self-powered loudspeaker designed to perform in the real world of sound reinforcement. They are the first systems to use our patented Differential Drive technology with ferrite drivers featuring high power, wide bandwidth and low distortion.
This bundle includes: 2 x JBL PRX710, 1 x Pair of speaker stand with carry bag and 2 x 6m XLR cables
Product Ref: 40918View Full Description
Full DescriptionView Full Description
The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX710 is a perfect match with a PRX700 Series subwoofer, offering a high performance self-powered sub/sat system.
The PRX710 is comprised of a 10" Differential Drive woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.
- 133 dB peak SPL
- 10" Differential Drive low-frequency driver for low-distortion and higher SPL
- 1.5" diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Normal and Boost user selectable EQ presets
- DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
- Integrated 36 mm pole mount socket
- Integrated handle with injection molded backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL's tour proven DuraFlex finish.
- Cloth backed, dent-resistant 16 gauge steel grilles
- Power Rating : 1500 W
- Frequency Range (-10 dB): Normal: 50 Hz - 19.6kHz / Boost : 42.9 Hz - 20kHz
- Frequency Response (±3 dB) : Normal: 63.5 Hz - 18.5kHz / Boost : 53 Hz - 18.6kHz
- Coverage Pattern : 100° x 60° nominal
- Directivity Index (DI) : 9 dB
- Directivity Factor (Q) : 8
- Crossover Frequency : 1.9 kHz
- Maximum SPL : 133 dB
- Signal Indicators :
- Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
- Signal : Green LED indicates signal present
- Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
- Dynamic Control (Input) : dbx Type IV? limiter circuit
- Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
- LF Driver : 1 x JBL M110-4 250mm (10 in) woofer
- HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver
- Enclosure : Trapezoidal, 18 mm, plywood
- Suspension / Mounting : single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point
- Transport : 1 x integrated handle with injection molded backing cup
- Finish : Obsidian DuraFlex? finish
- Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
- Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
- Output Connectors : 1 male XLR balanced output
- Dimensions (H x W x D) : 498.7 mm x 335.6 mm x 322.3 mm (19.63 in x 13.21 in x 12.69 in)
- Net Weight : 16.4 kg (36 lb)
The product price includes 2 years' warranty and 30 day money back guarantee.
However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers.
The highlights of this enhanced warranty service are:
- Warranty is extended to 5 years from the date of delivery.
- Our Money Back guarantee is extended from 30 days to 90 days (terms apply after 30 days)
- Collection and delivery costs are included for the first 2 years
- Claim 50% cash back on the cost of the policy after 5 years if it has not been used!
- Warranty is transferable if the item is re-sold
- Loan or replacement equipment will be provided if the product isn't repaired within 30 days
- If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered
- The policy can be cancelled within 30 days, and at any time after that for a pro-rata discount
Please note that this extended warranty is currently only available on products sold within the EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided.
For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs.
This enhanced warranty is in addition to the standard Gear4music and manufacturer warranty policies, and the Gear4music terms and conditions of trade. No statement or condition of sale contained within these terms affects or restricts your statutory rights as defined under the Consumer Contracts Regulation 2014.
All Products are new unless stated, and include a minimum of one year warranty.
This offer excludes computer software, in-ear monitors that have been opened, and items supplied to your personal specification.
If you also purchase items that do not qualify for free delivery, some delivery charges may be applied to your order which will be shown in your shopping basket.