Music Gear News

At Gear4music.com we update our news channel daily to ensure you always get the latest and most important music news.

Guitar Maintenance: Truss Rod Adjustment

Inside the neck of a guitar there is a metal truss rod, this helps to determine the curvature of the neck. The tension of the strings causes the neck to be pulled upwards. As a result use of different gauges of different string can mean that the truss rod will need adjustment.

When the truss rod is tightened it curves in the opposite direction to the neck. As a result the truss rod can counteract the upwards pull of the strings.

The action of a guitar is the distance between the strings and the frets. Adjustment of the truss rod can change the action of the guitar.

Why does a guitar need a truss rod?

Half way up the neck of any guitar, somewhat of a bow or ?relief? in the neck is required to prevent the strings from making contact with the frets when playing. If the strings did make such contact, a ?buzzing? would result.

Checking if adjustment is needed

  1. Truss rod too loose

The neck seems to bend upwards.

The relief of the neck is so much that the action of the guitar is very large. As a result it would be very difficult to play the guitar. The truss rod needs adjustment.

  1. Truss rod too tight

The neck seems to bend downwards.

There is no relief in this guitar's neck. As a result it is unlikely you will be able to strike any notes, or you will get a large amount of buzzing.

  1. Truss rod just right

Slight upward curvature.

There is a small bow in the centre of the neck, allowing for string vibration.

In order to check the relief of the neck of your guitar, press down on the first fret and the fret above where the neck joins the body of the guitar, this varies between models and types of guitar.

While holding these down, locate the 7th fret ? this should be where the bow is largest. Relief at this point should indicate whether or not your guitar neck needs adjustment.

Adjusting the truss rod

The primary thing to think about when adjusting the truss rod is to take care. The truss rod only needs a small adjustment to correct it. Too large an adjustment can damage the guitar.

A hexagonal, allen key will be necessary for truss rod adjustment.

Usually the top of the truss rod is located beneath a plastic cover in the headstock, although this may vary across guitar types.

Before adjusting the truss rod, loosen the strings. Make small adjustments, then retune the guitar and check the relief again, using the above method. Repeat this method until the bow is appropriate.

Insert the key into the top of the truss to turn it.

Clockwise: Tightens the truss rod and puts a downwards force on the neck.

Anti-clockwise: Loosens the truss rod and pulls the neck upwards using string tension.

Dislcaimer: These are instructional articles only and should be carried out only by someone with a superb knowledge of their instrument. Gear4music is not responsible for any damage inflicted by following these guidelines.

Posted on 20 Mar 2009 09:00 to category : Tips and advice

Related Music News

thumbnail

Update available to improve performance and fix bugs.

15 May 2015 07:00
thumbnail

Shure recently discussed how guitarists can achieve great results when recording at home or in a small project studio. We took a look and picked out our favourite points.

25 Jun 2014 14:15
thumbnail

Recreate the Brazilian carnival atmosphere at your World Cup party with our Samba instruments.

19 Jun 2014 09:46
thumbnail

Many parents want to encourage their child to take up an instrument early on in life. Music can be a fun and rewarding activity for children but knowing where to start can be tricky. Here are our top picks for ideal starter instruments for children under 7.

7 May 2014 11:16
thumbnail

You've spent ages perfecting your sound and now it's time to let others hear it too. Read our 8 Tips for Putting on a Great Live Show.

9 Sep 2013 15:09
thumbnail

When you're shopping for a loudspeaker, often the specifications can seem a bit confusing! Use this guide to help you demystify common terms and find the right speaker for your needs.

24 Jun 2013 11:47

Recent Music News

thumbnail

The latest addition to the illustrious range of Katana Amplifiers, the Katana-Mini guitar amplifier brings classic BOSS tone in a portable and lightweight design

23 Jun 2017 10:23
thumbnail

Today's second pedal release from BOSS for Roland's 'Future Redesigned' campaign, the MD-500 is the latest comprehensive workhorse for the modern musician.

23 Jun 2017 09:49
thumbnail

The most advanced reverb pedal to come from BOSS to date, the RV-500 pedal promises a wealth of tone shaping options and professional grade versatility

23 Jun 2017 09:14
thumbnail

Using the feedback from the guitar player community Walrus Audio has devised a new and improved pedal that eliminates the pitfalls of its predecessor.

22 Jun 2017 16:09
thumbnail

After the release of the Hall of Fame 2 and Pipeline Tap Tremolo Pedals, TC Electronic's Flashback 2 promises for unprecedented expression and otherworldly tone.

21 Jun 2017 15:29
thumbnail

Looking to get that perfect take? M-Audio's M-Track 2X2 Vocal Studio Pro gives you professional standard recording capabilities in a robust and compact format.

20 Jun 2017 15:01