Audio Technica ATND8677 Microphone Desk Stand

480.00 RRP 573.00 (including VAT @ 23%)

This product is currently not available for purchase

  • Desk Stand for Gooseneck Microphones
  • Connects Directly to Network via Ethernet Cable
  • 3-Pin XLRF-type in for Quick Mounting
  • Scalable Across Dante’s 512 Bidirectional Audio Channels
  • UniSteep® Filter Provides a Steep Low-Frequency Attenuation

Audio Technica ATND8677 Microphone Desk Stand

The ATND8677 desk stand allows Dante technology to be used with any phantom-powered condenser gooseneck microphone with a 3-pin XLRM-type output. The desk stand is designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications. The sturdy metal base features a 3-pin XLRF-type input and Dante network output, enabling direct connection to the network via Ethernet cable. The desk stand’s touch-sensitive capacitive-type user switch with integral red/green LED status indicator permits advanced local and remote control.

Product Ref: 58248

View Full Description

Full Description

View Full Description

About Audio-Technica

Celebrating 50 years of audio excellence worldwide, Audio-Technica is a leading innovator in transducer technology, renowned for the design and manufacture of microphones, wireless microphones, headphones, mixers, and electronics for the audio industry. Users of Audio-Technica microphones and headphones include Metallica, Gwen Stefani, Linkin Park, Rudimental, You Me At Six, Deaf Havana, Deap Vally, Glamour Of The Kill and Katherine Jenkins.


  • Connects directly to network via Ethernet cable - no need for expensive audio cable or soldering
  • Integrated user switch controls talk/mute in Local mode and triggers Dante-enabled devices in Remote mode
  • 3-pin XLRF-type in for quick mounting of gooseneck microphone
  • Red/green LED indicator
  • Local or remote control of mic gain, low-cut filter, LED indicator and 12V phantom power
  • Powered by network PoE
  • Scalable across Dante's 512 bidirectional audio channels
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone


  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave
  • Impedance: 1.4 kΩ
  • Maximum Input Sound Level:
    • -10 dBu @ +30 dB gain
    • -20 dBu @ +40 dB gain
    • -30 dBu @ +50 dB gain

  • Signal-to-Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Power Requirements: PoE IEEE802.3af standard (Power consumption 1.5W)
  • Switches:
    • Local Mode: Touch-sensitive capacitive-type user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off;
    • Low-cut filter: flat, roll-off;
    • Gain: +30 dB, +40 dB, +50 dB;
    • Phantom power: 12V DC, off
    • Remote Mode: Low-cut and Gain via third-party software*

  • Weight (Microphone): 770 g (27.2 oz)
  • Dimensions:
    • 133.0 mm (5.24") maximum length,
    • 93.8 mm (3.69") maximum width,
    • 46.2 mm (1.82") maximum height

  • Output Conmector:
    • Physical Level: Standard Ethernet
    • Input Connector: 3-pin XLRF-type