Full Description
View Full Description
With functions ideally suited for TV studios, theatres and live performances, the EUROLIGHT LD6230 is a high-end 6-channel DMX/analog controlled dimmer pack with great features.
The EUROLIGHT LD6230 is a high-end 6-channel DMX/analog controlled dimmer pack, with functions ideally suited for TV studios, theatres and live performances. It can be controlled either digitally with the DMX512 interface or you can go analog by using the additional 8-pole DIN connector.
The adjustable preheat and limiter function prolongs the bulb life. Various transmission characteristics of the control signals from the lighting console are made possible with its precise curve function.
The LD6230 features a switch option that allows a simple on/off control of each channel. The LC620 also has the automatic digital input check for detecting DMX signal errors. When in manual mode, dimming can be done even without an external lighting console.
An auto store function saves all settings after leaving configuration mode. The dimmer pack features a 3-digit display and dedicated control LEDs as well as HARTING® and CEE connection options (connectors not included).
For further information about the Behringer LD6230, you can look at the installation instructions, spec sheet and quick start guide below:
Installation Instructions:
Spec Sheet:
Quick Start Guide:
Features/Specifications
- 6-channel, DMX/analog-controlled dimmer pack with up to 10 A load per channel
- 3-phase mains supply (one phase possible at lower output power)
- Standard DMX512 interface
- Additional 8-pin DIN connector for analog control (0 ? 10 V)
- Adjustable Preheat and Limiter function to extend bulb life.
- Precise "curve" function enables selection of different fade modes.
- Switch option for simple on/off control of each channel.
- Automatic digital input check to detect DMX signal errors.
- Manual mode for dimming capability without an external lighting console.
- Automatic store function saves all settings after leaving Configuration mode.
- 3-digit display and dedicated control LEDs for better indication in dark environment.
- Harting® and CEE connection options (connectors not included).
- High-quality components and rugged construction for a long-lasting dimmer pack.
Channels
- Number: 6
- Load per Channel: 0.2 A min./10 A max.
- Maximal load per channel: 10 A using a 3-phase connector
- Frequency: 50/60 Hz
Inputs
- Power Supply: 3-phase connector, internal terminal block/PG cable screw joint, CEE connector (optional installation by qualified professional)
- Analog: 0 to +10 V via 8-pin DIN
- Digital: DMX512 via 5-pin XLR
Outputs
- Digital: DMX512 via 5-pin XLR
- Load: Internal terminal block/PG cable screw joint, HARTING (optional installation by qualified professional)
System Fuses
- Load Securing Per Channel: 10 A cable protection switch (type C)
- Control Section Fuse:
- 2 x T 100 mA H/250 V (EU)
- 1 x T 160 mA H/250 V (EU)
- 2 x T 160 mA H/250 V (UL)
- 1 x T 315 mA H/250 V (UL)
Power Supply
- Voltage: 240 V , 50 Hz (EU/UK/AUSTRALIA), 120V , 60Hz (USA/Canada)
- Maximum power consumption: 3 x 20 A
Physical Specs
- Dimensions (Approx.):
- Height: 3 1/3" (84.3 mm)
- Width: 19" (482.6 mm)
- Depth: 15 9/10" (403.8 mm)
- Weight (Approx.): 21.6 lbs / 9.80 kg