OFFLINE HK Audio Elements Voice One Pack

  • Video 1
984.00 RRP 1,172.00 (including VAT @ 23%)

This product is currently not available for purchase

  • Size for up to 50 People

OFFLINE HK Audio Elements Voice One Pack


This is your first choice for mono voice reinforcement at smaller conferences and presentations.

Product Ref: 23885

View Full Description

Full Description

View Full Description

It's also an excellent setup for covering specific zones. Its linear response and directional dispersion pattern ensure excellent speech intelligibility.


  • Small vocal venue, audiences up to 50 people.

Package Comprises:

  • 1x E 435 Mid-/High Unit
  • 1x EA 600 Amplification
  • 1x EP 1 Mounting Pole
  • 1x EF 45 Foot

HK Audio Elements Top Mid/High Cabinet

The mid / high unit 435 is equipped with four specially equipped for ELEMENTS developed 3.5 "high-performance loudspeakers. The arrangement of these four speakers in a vertical line is a very even distribution of the volume and frequency of the image on the loudspeaker will be public space achieved.

A column system can contain up to four mid / high units that are connected via e-Connect quickly and reliably.

E435 Features/Specifications:

  • Scalability mid / high unit with line array technology
  • homogeneous and focused coverage
  • Durable aluminum housing
  • E-Connect signal connection

E435 Further Specs:

  • Rated power (RMS): 150 W RMS
  • Frequency response: -10 dB 140 Hz - 20 kHz, about integirerten active filter system
  • Nominal impedance: 16 ohms
  • Sensitivity: 1W / 1m 97 dB, all measurements in Half-Space
  • E-Connect connectors: 1x in, 1x E-Connect out
  • Speakers: 4 x 3.5 "full range speaker
  • Directivity: 70° horizontal
  • Crossover frequency: 140 Hz, 12 dB / oct
  • Dimensions (WxHxD): 11 x 38 x 12 cm * 15 * x 4-7/16 x 4-3/4 "

Please Note: 1x E435 Included in this package

HK Audio Elements Digital Power Amp - 600W

The EA 600 amp unit is built in the same case design as the mid / high unit E 435th The output power is 600 watts at 4 ohms. With this system, amp, you can choose to supply up to two subwoofers E 110 Sub or a passive subwoofer with a maximum of two mid / high units E 435 or a column with a maximum of four mid / high units.

The ventilation of the amplifier module is provided via front panel. A switch can be connected depending on the number of E 435, a special equalization choose to optimize the frequency response for each line length.

EA600 Features/Specifications:

  • Power amplifier with 600 watt Class D Power
  • Connecting max.vier mid / high units or max. one or two subwoofers subwoofer with max. two tops
  • 4 filter system (selectable depending on the number of connected lines in a mid high units)
  • E-Connect signal connection

EA600 Further Specs:

  • Continuous Power per channel: @ 4 ohms 600 watts @ 4 ohms Class D (EIA)
  • Active protection circuits: RMS limiter
  • Input Sensitivity: +4 dBu / -10 dBu (switchable)
  • DC: protection, impedance, thermal
  • Cooling: fan, temperature controlled
  • Connectors: In combination jack connectors, XLR Out, 1x Parallel Speakon Out., 1x E-Connect out
  • Dimensions (WxHxD): 11 x 38 x 12 cm
  • Filter Type: subsonic filter, system filters 4-fold, depending on the number of connected mid-high units

Please Note: 1x EA600 included in this Package

HK Audio Elements Pole Mount

With the e-Connect-distance rod EP 1, it is possible to adjust one or more mid / high units at a certain height on the stand or the EF 45-amp system EA 600th.

The spacer bars are up to a length of 1.60 m (EP 2 = 60.5 cm) - infinitely adjustable and is fixed by a screw cap to the desired height. The ingenious Elements design, means speakers need only be mounted to this stand and the EF45 (available separately) base in order to have uncluttered connection (cable free)

With HK Audio's E-Connect, a unique new type of integrated coupler/bus, you can configure your Elements rig far more easily and quickly than conventional systems. Just a few minutes are all it takes to set up an Elements system. Simply snap the components together, automatically linking them via E-Connect, plug in your signal source, and let the show begin.

EP1 Features/Specifications:

  • Anodized aluminum with large locking screw
  • Height adjustable from 95-160 cm (EP 2 = 40 to 60.5 cm)
  • Integrated e-connect signal connection
  • very low weight (0.8 kg = EP 1)

Please Note: 1x EP1 included in this package

HK Audio Elements System Base

Using the ELEMENTS EF 45-base, the power amplifier module and the mid/high unit can be plugged-in in order to have clutter free speaker connections. The double-sided integrated NL4 connectors are used for recording and transmission of the audio signal to additional speakers.

With multiple speaker/sub woofer combinations the EF45 is an essential element of HK Audio's groundbreaking ELEMENTS Series.

EF45 Features/Specifications:

  • Anodized aluminum with large locking screw
  • Height adjustable from 95-160 cm (EP 2 = 40 to 60.5 cm)
  • Integrated e-connect signal connection
  • very low weight (0.8 kg = EP 1)

Please Note: 1x EF45 is included in this package.

Your order may be delivered with a plug adapter
If any electrical items in your order are supplied with a United Kingdom plug connection, a suitable plug conversion adapter will be included free of charge.