DISC Fostex DC-R302 Portable SD Recorder for DSLR Camera

682.00 RRP 844.00 (including VAT @ 23%)

This product is currently not available for purchase

  • Stereo SD Recorder with 3 Channel Audio Mixer
  • Records Stereo WAV Up to 24-Bit/96kHz
  • Top Mounted Detachable Camera Mount
  • Remote Start Function to Sync Video + Audio Recording
  • 3 x Tripod Screw Holes on Unit Base

DISC Fostex DC-R302 Portable SD Recorder for DSLR Camera


The Fostex DC-R302 stereo recorder is designed for use with video-capable DSLR cameras, allowing you to capture pristine quality stereo audio with your HD video. It boasts an onboard three-channel audio mixer and makes it easy to operate the recorder and the camera simultaneously.

Product Ref: 37287

View Full Description

Full Description

View Full Description

The DC-R302 is equipped with three XLR inputs with Limiter and High Pass Filter, with 48V phantom power for use with condenser microphones. There is a Microphone Out in addition to the Line Out to send the stereo mix to the camera, and headphone monitoring of Left / Stereo / Right / Return.

The Remote Start function allows the DSLR camera's video recording to start and stop in sync with the REC button, making it easier to synchronise the audio and the video. There is also an Auto Slate Tone (1kHz / sine wave) that is convenient for subsequent synchronisation.

The camera can be mounted on top of the recorder, and there are three tripod screw holes on the unit base for mounting on various camera rigs.



  • Connector: XLR-3-31 (Female, #2 Hot), Balanced
  • Reference Input Level: HI -60 / MID -55 / LOW -50dBu (Mic), -10dBu (Line)
  • Maximum Input Level: HI -32 / MID -27 / LOW -22dBu (Mic), +10dBu (Line)
  • Input Impedance: More than 10kOhm
  • Phantom Power: P48V +/-4V (10mA/CH) (Mic)


  • Connector: 3.5mm Stereo Mini, Unbalanced
  • Reference Input Level: -10dBV
  • Maximum Input Level: +2dBV
  • Input Impedance: More than 10kOhm

Main Out:

  • Connector: RCA Pin, Unbalanced
  • Reference Output Level: -10dBV (at Reference Level Input & -12dBFS Signal)
  • Maximum Output Level: +2dBV (at 0dBFS)
  • Load Impedance: More than 10kOhm

Mic Out:

  • Reference Output Level: -50dBV (at Reference Level Input)
  • Maximum Output Level: -30dBV
  • Load Impedance: 10kOhm


  • Frequency Response:
    • Line In - Main Out: 20Hz - 20kHz +/-1dB (at Reference Level)
    • Mic In - Main Out: 40Hz - 20kHz +/-3dB (at Reference Level)
  • S/N Ratio (A-Weighted):
    • Line: More than 95dB (Input Gain -10dBV)
    • Mic: More than 55dB (Input Gain Max / 150 Ohm Loaded)
  • Total Harmonic Distortion:
    • Line: Less than 0.01% at 1kHz (Input Gain: Line)
    • Mic: Less than 0.1% at 1kHz (Input Gain: Hi)