Resident Audio T4 Thunderbolt Audio Interface, Nearly New

Full Description

Thunderbolt

Developed by Intel Labs in collaboration with Apple, Thunderbolt is the most advanced input/output (I/O) protocol available today. Twice as fast as USB 3.0, twenty times faster than USB 2.0 and twelve times faster than Firewire 800, it provides unparalleled audio performance with near-zero latency.

The T4 allows you to record and play back audio with awesome sound quality. Unlike USB devices (which can only carry a maximum of 2.5 watts of bus power), Thunderbolt allows for a full 10 watts of power to be carried over the same wire as the audio signal. This allows designers to use higher quality components in the T4, such as custom designed analog preamps (the T4 has eight of them?two for each channel) and high-power A/D/A converters.

User Friendly

The T4 is lightweight and portable and comes with all the software drivers needed. Built with both the studio and the road in mind, the T4 is mounted in a sturdy aluminum/acrylic chassis that can stand up to the wear and tear of an artist on the go. And because it doesn't need a power cable, it can easily be integrated into any live performance rig.

It has a range of innovative features such as an auto-detecting Multichannel Output Mode and Smart Monitoring, which automatically switches between stereo and mono depending upon input configuration.

Four combo XLR / ¼" input jacks allow you to plug in microphones, instruments and line-level devices - with phantom power for all inputs - and there are four balanced TRS outputs for connection to speakers and external mixers. MIDI connectors enable the T4 to be used as an ultra-stable MIDI interface, and there are even dual headphone outputs. Tilted tactile gain controls with three-color wraparound LEDs allow you to quickly set optimal levels, even in low-light onstage environments.

Innovative Design

Easy Set-Up

Setting up the T4 is fast and easy. It comes with everything you need: a Thunderbolt cable, a QuickStart guide, and a USB card preloaded with all required software and user manual. Simply plug it in, install the drivers, and you're good to go.

The T4's drivers have been programmed by some of the best engineers in the industry. They're specifically designed to ensure stable performance and minimal CPU overhead, allowing your computer to focus on tasks like effects processing and real-time graphic display.

Features

• Near-zero latency for virtually instantaneous recording and playback
• Support for high resolution 24-bit/96kHz audio
• Four channels of I/O
• Four combo XLR / ¼" inputs, each with input gain controls and three-color wraparound LEDs
• Four balanced TRS ¼" outputs
• Dedicated headphone output and secondary headphone output
• Input mix control to blend live signal with computer playback
• Master "Big Knob" output control
• Smart Monitoring automatically switches between stereo and mono
• High quality mic preamps and ADA converters
• Phantom power allows use of condenser microphones
• Bus-powered (no need for AC or batteries)
• Compatible with Thunderbolt equipped Mac and compatible Windows computers
• Thunderbolt cable included
• Comes with all required software drivers
• Lightweight and portable
• Sturdy aluminum/acrylic chassis ensures roadworthiness

Specifications

Connectors

• Input: 4 x Combo XLR mic / balanced ¼" TRS, line / instrument level
• Output: 4 x balanced ¼" TRS line-level, 1 x stereo ¼" headphone output, (optional second headphone output via Output 3)
• MIDI: Input / Output
• Thunderbolt port: 1 (bus-powered)

Controls

• Trim: 4 (1 per channel) with 0 to +35 dBu mic gain range
• LED clip indicator: 5 (1 per channel and 1 for Input Mix)
• Line/Instrument switch: 2 (Inputs 1 & 2 / 3 & 4)
• Phantom Power: On/Off +48V (global for all channels)
• Input Mix: Blends live input signal with computer output signal
• Big Knob: Controls headphone level and monitoring level (Stereo Mix mode only)

Preamplifiers Microphone

• Connector: XLR Female
• Input Impedance: 1.5k Ohm
• Dynamic Range: > 92dB
• Gain Range: +15dB +60dB (45dB range)
• Maximum Input at Minimum Gain: -1dBu
• Equivalent Input Noise: -124dBu (Gain +60dB @150 ohm termination)
• Total Harmonic Distortion + Noise: > 0.009 (@1kHz, -1dBFS)

Line

• Connector: TRS 1/4" Phone
• Input Impedance: 9.2k Ohm
• Dynamic Range: > 95dB
• Gain Range: +0dB +45dB
• Maximum Input at Minimum Gain: +15dBu
• Total Harmonic Distortion + Noise: > 0.008

Instrument

• Connector: TS 1/4" Phone
• Input Impedance: 1000k Ohm
• Dynamic Range: > 91dB
• Gain Range: +0dB +45dB
• Maximum Input at Minimum Gain: +15dBu
• Total Harmonic Distortion + Noise: > 0.01

Audio

• Bit resolution: 24-bit
• Sampling rates: 44.1, 48, 88.2, 96 kHz
• Mac - and Windows - compatibility: Recommend Mac OS X 10.9 Mavericks or higher, Windows 8 or higher
• Supports: ASIO, Core Audio, Windows Audio Session API (Windows 8)

Hardware

• Preamps: 2 per channel, mic / instrument
• Chassis: Aluminum/Acrylic
• A/D/A converter: More than 100dB dynamic range
• Smart Monitoring: Stereo or Mono, selected by Line/Instrument switch
• Stereo Mix mode: All inputs and outputs to Outputs 1 & 2 plus Output 3
• Multichannel mode: 4 individual output channels
• Dimensions: 10.6 x 4.4 x 1.8 in.
• Weight: 2.3 lbs

What's included

• T4 Audio interface
• Thunderbolt cable (0.5m / 19.5 in)
• USB card with T-Series driver
• QuickStart guide

Please note: the original boxing is scuffed and the seals are broken, otherwise the unit itself looks and operates as new. It was returned unwanted by a customer under our 14 day money back guarantee.

This is a great opportunity to buy a fully functioning, nearly new product at a discounted price, supplied with a two year warranty. Software may not be included