Tascam DA-3000 2 Channel High Definition Audio Recorder
Tascam DA-3000 2 Channel High Definition Audio RecorderDetails
The DA-3000 is an essential tool for recording engineers combining high-quality master recording and ADDA Conversion. It can be used as a portable monitoring system, for AD converter for mastering, simultaneous master file recording using high sampling frequency PCM/DSD recording, DSD multitrack recorder and DA converter for a PA/SR digital console.
Product Ref: 40861View Full Description
Full DescriptionView Full Description
DA-3000 as a PCM/DSD Master Recorder
The Tascam DA-3000 is a high performance PCM/DSD master recorder with stereo recording of analog and digital signals at high sampling frequencies up to 192kHz PCM and 5.6MHz DSD suitable for archival masters. The unit can record to SDHC cards and UDMA supported CF cards.
The DA-3000 has a variety of inputs and outputs to handle a diverse range of recording situations. This enables connection with all types of studio equipment including audio interfaces and mic preamps. The analog inputs and outputs both include XLR and RCA jacks whilst the digital connections include S/PDIF RCA coaxial and XLR jacks to support AES/EBU. The BNC SDIF-3 inputs and outputs support DSD digital connections.
The upgraded user interface makes the system easier to use with all of the necessary controls included in the long, brightly lit meters and display. The 128x64 display allows you to check all the information quickly and the 24 dot level meters mean you can be confident of monitor levels at all times.
DA-3000 as a ADDA Converter
The DA-3000 has dual mono circuits that eliminate interference between left and right channels. Two high-quality mono circuits are built into the unit. The left/right channels each use one highly-acclaimed BurrBrown PCM1795 D/A converter chip. The TASCAM DA-45HR, which is still used in many studios, uses a dual mono structure with NE5532 ope amps and BurrBrown D/A converters. By using an equivalent output circuit structure including DA converters of even higher quality that support DSD, the DA-3000 provides a portable high-quality monitoring system.
The internal circuit uses a fully balanced strucuture completely resistant to noise from inputs and outputs. This has a great effect on the output and input stage impacting the recorded audio. The input audio is digitalized by the BurrBrown PCM4202 ADC after it passes through the analog input circuit.
Tascam did months of tests to select the high quality parts to go into the DA-3000. The NJM2114 and NE5532 and low impedance capacitors were chosen for low resistance, low noise and high precision audio quality. The fanless design of the DA-3000 means unwanted fan noise is eliminated whilst still maintaining a comfortable monitoring environment.
In order to assure high-quality audio input and output, a stable power supply is indispensable. The EI core transformer incorporated into this unit has separate coils - one for the digital circuits and control panels and one for the analog circuits - making it possible to capture even higher-quality signals by suppressing noise. In addition, for the clock generator, Tascam have used a temperature-compensated crystal oscillator (TCXO) that boasts 1-ppm precision.
The DA-3000 has multiple applications, one of which is as a portable high quality monitoring system. Install the unit in a portable rack and you have reliable monitoring in any studio. You can connect it to a studio DAW and a high precision clock generator. In home studios you can achieve the same high level work efficiency by using digital connections like you would with a small studio interface.
You can also use the Tascam DA-3000 as an AD Converter at the end of an analog mastering chain. The balanced, low noise circuitry and the high quality AD circuitry convert audio using analog EQs and compressors into digital signals without sound degradation.
The system is also ideal for simultaneous master file recording using high sampling frequency PCM/DSD recording. At the same time that you record a PCM master file (16-bit/44.1kHz) in software using a DAW system, you can also make a high sampling frequency PCM/DSD recording by connecting the DA-3000 directly to an analog mixer. By capturing two types of digital master recordings, you'll be ready for any future post-recording needs.
Using the DA-3000's clock precision, you can DSD multitrack record with multiple units. As the DA-3000 can record two mono files instead of a stereo file, 8 units could be used together for 16 tracks of recording. Connecting the COAXIAL jacks is the only necessary connection between the units.
The Tascam DA-3000 can also be used as a DA Converter for a PA/SR Digital Console. If you connect the digital outputs of the console to the DA-3000 you can upgrade the hall sound to an even higher quality. The OEL display and high visibility level meters mean you can check the signal status easily in dim rooms.
- Stereo recording to SDHC card or CF card
- PCM recording format: BWF (44.1/48/88.2/96/176.4/192kHz, 16/24bit)
- DSD recording format: DSDIFF/DSF (2.8/5.6MHz)
- SD card slot (supports 4 to 32GB SDHC cards)
- CF card slot (supports UDMA)
- WAV file playback
- Cascade function enables simultaneous operation of multiple units
- Recording 2 mono files from stereo input possible
- Mark functions can be used set up to 99 points per file (mark information can be used in software that supports BWF format)
- When recording, designation of the recording file folder possible
- Synchronized recording using level, stop time and recording start delay time setting
- Input level can be adjusted in 0.5dB step
- Using automatic track incrementing function, new files can be created automatically while continuing to record when a condition (level, file size, digital input) set in advance occurs
- Manual track incrementing function can be used whenever you like to create a new track while continuing to record
- Automatic mark functions can be used to easily check problems (levels, word clock unlocking) detected during recording
- File name format can be set to either a user-defined word or the date and time
- Repeat playback function (all files or single file)
- Folder playback function can be used to play all files in a folder
- Playlist function allows files to be programmed in advance for playback
- Divide and delete functions can be used to manage files that are already recorded
- UNDO function can be used to cancel the previous operation
- USB host port supports copying between USB flash drives and CF/SDHC cards
- File names can be changed
- Direct location possible when a USB keyboard is connected
- Word clock master can be set to Internal, Word input or Digital inputs
- Analog input and output reference levels can be set to -9/-14/-16/-18/-20dBFS
- Digital input has a sampling rate converter (supports 32 to 216kHz)
- Audio files prepared on a computer can be played back (if in a format supported for playback by this unit)
- Oscillator function (440Hz, 1kHz, 10kHz)
- Input monitoring function allows input signals to be output without recording
- Updating is possible
- EI core transformer used in power supply section
- Dual mono circuits eliminate interference between left and right channels
- Fully-balanced circuits realize low noise
- 128x64 OEL display with a wide viewing angle
- 24-dot stereo LED level meters with adjustable brightness make checking levels easy
- TCXO with 1ppm precision
- Backup memory stores settings even when the power is off
- Fanless design eliminates unwanted noise
- Aluminium front panel harmonizes with other studio equipments design
- Operation possible using included RC-10 wireless remote control
- Standard 1/4" headphones jack provides 45mW/ch output
- USB port for USB keyboard (supports USB 1.1)
- USB port for USB flash drive (supports USB 2.0)
- XLR digital input/output (supports AES3-2003 and IEC60958-4:AES/EBU formats)
- RCA Coaxial digital input/output (supports IEC60958-3:S/P DIF format)
- BNC digital input/output for DSD (supports SDIF-3 and DSD-raw formats)
- RCA analog unbalanced input/output
- XLR analog balanced input/output
- EIA 1U rackmount size
- RoHS compliant
For detailed specifications please view the PDF at the top of this listing.
*Don't use a wireless remote controller when you use multiple units except using the cascade function. Please take 1U or more of blank space above the DA-3000 for ventilation.
The product price includes 2 years' warranty and 30 day money back guarantee.
However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers.
The highlights of this enhanced warranty service are:
- Warranty is extended to 6 years from the date of delivery.
- Our Money Back guarantee is extended from 30 days to 180 days (terms apply after 30 days)
- Collection and delivery costs are included for the first 2 years
- Claim 50% cash back on the cost of the policy after 6 years if it has not been used!
- Warranty is transferable if the item is re-sold
- Loan or replacement equipment will be provided if the product isn't repaired within 30 days
- If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered
- The policy can be cancelled within 30 days, and at any time after that for a pro-rata discount
Please note that this extended warranty is currently only available on products sold within the EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided.
For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs.
This enhanced warranty is in addition to the standard Gear4music and manufacturer warranty policies, and the Gear4music terms and conditions of trade. No statement or condition of sale contained within these terms affects or restricts your statutory rights as defined under the Consumer Contracts Regulation 2014.
Once the product is delivered, you have 30 days to decide that you definitely want to keep it. If you decide it is not suitable for any reason, you can return it back to us for replacement or full refund, including standard delivery charges.
All Products are new unless stated, and include a minimum of 2 years warranty.
Some items are only eligible for money back guarantee if they are returned to us unused and sealed in the original packaging, and in the case of software, unregistered. These items include:
- CDs & DVDs
- In-ear Monitors
- Earplugs and Ear Protection
- Mouthpieces, Reeds etc… for Woodwind and Brass instruments
- Mouth / Lip Care Products
We are unable to accept returns of any custom made items designed to work together as a unique package, such as computer system built to a customer’s personal specifications. Exceptions may only be possible with prior agreement of the vendor, and may be subject to a cancellation fee.
If you also purchase items that do not qualify for free delivery, some delivery charges may be applied to your order which will be shown in your shopping basket.