Full Description
View Full Description
What's included
- 1 x SESSION4 Column PA System (2 x tops, 1 x sub)
- 2 x 35mm sub-top pole M20 thread
- 1 x 4-wire SPEAKON cable (2mt)
- 1 x carrying bag for the two tops
Stellar sound
The SESSION4 is comprised of two top speakers and a subwoofer, providing an excellent frequency response of 45Hz – 18kHz and a peak system output of 122dB.
Each of the top speakers is made up of four neodymium drivers which are arranged in a vertical array configuration with a logarithmic arrangement and a progressive down tilt. This results in clear, accurate sound projection with an excellent coverage pattern of 100°50° too.
The subwoofer delivers punchy, powerful bass with extended low-frequency response. It manages this thanks to its two 6.5" woofers arranged in a band-pass configuration. Combined with the column speakers, you get a comprehensive sound that will deliver quality in any space.
Fit for any venue
Playing with your band in an upstairs room of a pub? DJ'ing into the night for a friend's wedding? Making your voice heard at a professional conference? Whatever the task, whatever the venue, SESSION4 has the flexibility to get the job done.
The two top speakers and the sub can be arranged in a number of ways. Each top can go on either side of the sub on speaker stands (not included). A similar setup can be achieved by placing one of the tops on a speaker pole on top of the sub. And for a powerful mono setup, you can stack the two top speakers together, with them on top of the subwoofer.
Plus, there are a number of EQ options designed for different rooms and setups. So you always have a wide variety of ways that will fit in well with any venue. You never know what each space might demand, but SESSION4 has got you covered.
Take on the road with ease
SESSION4 is designed for life on the road. Each component is housed in a sturdy plywood enclosure, so is able to take the wear and tear of going back and forth from venues.
As well as built-in handles - there are two compartments in the subwoofer designed to house the two top speakers. So the system is ready to go on the road any time.
Advanced system technology
Using PROEL CORE LT DSP, SESSION4 delivers brilliant sound definition. This allows for both dynamic EQ and four presets - MUSIC, LIVE, DJ, SPEECH - allowing the speaker to be useful for a number of use cases.
This, and other aspects, are controlled with a single knob and a large LCD display. You can adjust DSP parameters, switch between microphone and line inputs, configure the system settings and adjust the built-in Bluetooth controls. So while it is easy to use, SESSION4 has the capability for in-depth configuration.
Features
Top speaker
- Uses four 2.75" neodymium full-range speakers, configured in a Vertical Array
- Speakers arranged logarithmically, with progressive tilt to aid vertical coverage
- Two tops are coupled quickly with an integrated power link
- Secure connection using SPEAKON connector
- Uses a standard 35mm pole socket
- Cabinet constructed from plywood with durable black polyurethane pain
- Metal grille is reinforced with dust protection
Subwoofer
- Combines two high-excursion 6.55" woofers in a band pass configuration
- Cabinet constructed from plywood with durable black polyurethane pain
- Built-in spaces for storing the two top speakers
- For easy transport, has two ergonomic built-in handles
- M20 pole socket designed for most standard speaker poles
System
- Class D SMPS power amplifier with three channels
- Total peak power of 1200W
- Two MIC/LINE inputs and two LINKS using male XLR
- For the TOP speakers there are two SPEAKON outputs
- Easy access to the control and connection panel on the cabinet's top
- CORE LT DSP provides high definition sound with A/D and D/a 24 bit converters and Dynamic EQ
- Easy to use with a single knob and a large LCD
- Choose from 4 DSP presets - MUSIC, LIVE, DJ and SPEECH
- Select between three system configurations: STEREO, MONO and DOUBLE
- Stereo Bluetooth interface for wireless streaming
- Maximum SPL of 122 dB and frequency response from 45 Hz to 18kHz
Specifications
System
- System Type: Portable Powered 2.1 System with Two Line Array Tops and One Subwoofer
- Maximum SPL Output: 122 dB peak system output (pink noise)
- Frequency Response (-10dB): 45Hz – 18kHz
Speakers
- LF Driver: 2 x 6.5" (165mm) woofer in BANDPASS configuration
- HF Driver: 8 x 2.75" (70mm) neodymium drivers (4 for each TOP)
- Coverage Pattern: 100° x 50°
Amplifier
- Type: Class D with SMPS
- System Power Rating: 300 Watts LF, 2x150 Watts HF Continuous, 1200W Peak
- Channels: 2 MIC/LINE selectable inputs
- Connectors: 2 x COMBO (INPUTS), 2 x XLR-M (LINK), 2 x SPEAKON (POWER OUTPUTS)
- Controls: 1 x LCD with Data Encoder
- Processing: 24bit / 48KHz CORE DSP, 2-band EQ Selectable CONFIGURATION and EQ PRESETS, Digital Limiting
- Wireless Audio: Bluetooth built-in receiver
General Specifications
- Cabinet Material: Plywood
- Finishing: High-strength polyurethane black paint
- Grille: Powder coated perforated steel
- Handles: 2 x sides (SUB)
- Pole Socket: 1 x top M20 (SUB), 1 x bottom 35mm (TOP)
- Included Accessories: M20 / 35mm telescopic pole, 4-wire SPEAKON/SPEAKON cable, 2 x SAT cover
- AC input: 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
- Dimensions (W x H x D):
- TOP: 100x358x100 mm
- SUB: 420x480x460 mm
- Weight:
- TOP: 1.5 kg (3.3 lbs)
- SUB: 22 kg (48.5 lbs)
- SYSTEM: 25 kg (55.1 lbs)