Full Description
View Full Description
Calibrate quickly or measure in detail
ARC Studio+ gives you two ways to approach room calibration, so you can match the measurement process to your setup. Need a fast reference in an untreated room, temporary studio, or location setup? Connect the included ARC measurement microphone, hold the front-panel calibration button, and the processor performs a one-point measurement without requiring a computer.
For permanent spaces, ARC X supports measurements across 1, 3, 7, or 21 positions, building a detailed 3D representation of your listening environment. Once uploaded, your calibration profile runs directly from ARC Studio+, so ARC X software does not need to remain open while you work.
Keep correction outside your DAW
Room correction is handled by dedicated hardware rather than a plug-in inside your recording software. This keeps your monitoring path consistent and avoids accidentally listening without correction because a plug-in has been removed or bypassed. It also means ARC Studio+ can slot into console-based, hybrid, and in-the-box setups while delivering near-zero processing latency.
Mastering-grade conversion and internal clocking support more than 120 dB(A) dynamic range, alongside ultra-low distortion and jitter. A 0.5 Hz to 40 kHz frequency response helps preserve the character of your monitoring system while ARC X addresses acoustic problems within your listening environment.
Integrate your subwoofer with less setup
Adding a subwoofer can introduce extra alignment work, particularly around crossover, phase, and level. ARC Studio+ handles these areas through its dedicated Sub output. Once a subwoofer is connected, the processor detects it and configures routing for a 2.1 monitoring setup. It analyses how your main speakers and sub interact, then applies phase and level corrections for more coherent low-frequency reproduction at the listening position.
Crossover points and slopes are managed internally too, helping reduce unwanted overlap, cancellation, and excessive build-up. You can store three individual full-range and 2.1 calibration profiles, giving you practical options for different speaker configurations.
Connect and recall your monitoring setups
ARC Studio+ supports analogue and digital studio workflows through a useful range of connections. Balanced combo XLR/TRS inputs and balanced XLR outputs cover analogue monitoring, while relay-controlled hard bypass electrically isolates the processor from the audio path when correction is bypassed.
For digital setups, USB-C input and optical S/PDIF input and output let you add correction without requiring an extra analogue-to-digital or digital-to-analogue conversion stage. Three onboard presets keep everyday switching straightforward. Each can contain your calibration profile, speaker routing, subwoofer setting, and selected input, then be recalled using dedicated front-panel controls. The redesigned all-aluminium enclosure provides a dedicated hardware format for regular studio use.
What's Included
- 1x ARC STUDIO+
- 1x Power Supply
- ARC MEMS Measurement Microphone
- USB-C to USB-A Cable
Features
- Advanced ARC X room correction for accurate and consistent monitoring
- Standalone one-touch calibration for fast computer-free room setup
- Multi-point room measurement with 1, 3, 7 or 21 listening positions
- Hardware-based correction that operates independently from the DAW
- Near-zero latency processing for uninterrupted monitoring workflows
- Integrated subwoofer output with automatic detection and signal routing
- Automatic phase and level matching between main speakers and subwoofer
- Optimized crossover management for smooth low-frequency integration
- Support for both full-range stereo and 2.1 monitoring configurations
- Three onboard presets for instant access to complete monitoring setups
- Preset control for calibration, speaker routing, subwoofer status and input source
- Balanced XLR and TRS combo analog inputs with balanced XLR outputs
- Relay-controlled hard bypass for an isolated analog signal path
- USB-C digital audio input for direct digital integration
- Optical S/PDIF input and output for digital monitoring systems
- Mastering-grade conversion and precision internal clocking
- More than 120 dB(A) dynamic range for highly detailed monitoring
- Ultra-low distortion and jitter for transparent audio reproduction
- Wide 0.5 Hz to 40 kHz frequency response
- Rugged redesigned all-aluminum enclosure
- Included ARC measurement microphone for room analysis and calibration
- Front-panel controls provide direct access to calibration and preset selection
- Suitable for console-based, hybrid and fully in-the-box studio workflows
```
Specifications
- Audio:
- Supported sample rates: 44.1, 48.0, 88.2, 96.0, 178.4, 192.0 kHz
- Audio conversion resolution: 32-bit
- Frequency response: 2 Hz - 87.0 kHz (-2.0 dB)
- Dynamic range: 120 dB (A-weighted)
- THD (1 kHz @ -1 dBFS): 0.00011% (-119.4 dB)
- THD+N (1 kHz @ -1 dBFS): 0.00023% (-112.7 dB)
- Channel crosstalk (1 kHz): -134.0 dB
- Max phase deviation: +7° 20 Hz, +16° 22 kHz
- Input impedance (balanced): 20 kOhm
- Output impedance (balanced): 50 Ohm
- Maximum input level: +18 dBu
- Maximum output level: +18 dBu
- Latency:
- Natural phase mode: 1.4 ms
- Linear phase mode: 42 ms
- Power: 5V DC, 2.5A, center positive
- Dimensions:
- Size: 19.7 cm / 7.76" x 12.2 cm / 4.80" x 4.4 cm / 1.73"
- Weight: 625 g / 1.38 lb
- Package includes:
- ARC STUDIO+
- ARC microphone
- ARC microphone clamp
- ARC microphone pouch
- USB cable
- Power supply unit
- Compatibility:
- Windows: Intel, AMD, and Arm64 processors supported
- macOS: Apple Silicon and Intel processors supported
- Product Code: IP-ARC-STUDIOPLUS-IN