Full Description
View Full Description
Hear more detail with redesigned acoustic components
The iLoud Micro Monitor 2 features a completely redesigned acoustic system, combining custom drivers with upgraded amplification for improved clarity and low-frequency performance. Each speaker houses a 3-inch composite fibre mid-woofer and a 3/4-inch silk dome tweeter with a precision waveguide, helping reproduce detailed highs and controlled bass.
Four efficient Class-D amplifiers provide 50W RMS continuous system power, with 70W available at peak output. A redesigned rear bass-reflex port improves low-frequency control while reducing unwanted airflow noise. Alongside the strengthened cabinet construction, these improvements help minimise resonance and distortion, giving you a clearer picture of your audio.
Adapt your monitoring to different rooms
Room acoustics can significantly affect what you hear, particularly when working in untreated spaces. The iLoud Micro Monitor 2 addresses this with built-in room correction through IK Multimedia's ARC X ecosystem. Using ARC X software and an ARC measurement microphone, you can measure your listening environment and create a correction profile tailored to your setup.
This profile is stored directly inside the monitors, allowing their internal DSP to apply the correction without requiring additional processing hardware during playback. The result is more consistent tonal balance and tighter bass, helping you make informed mixing decisions in bedrooms, home studios, and temporary workspaces.
Place every sound with greater precision
Accurate stereo imaging makes it easier to position instruments, balance vocals, and judge spatial effects within a mix. The iLoud Micro Monitor 2 uses linear-phase processing technology developed for IK Multimedia's larger monitoring systems to preserve timing relationships across the frequency spectrum.
Its digital crossover operates at 3.5kHz, while the system maintains phase coherence within 20 degrees between 220Hz and 23kHz. This helps retain transient accuracy and precise stereo positioning, so you can hear how individual elements sit alongside one another. With a frequency response extending from 49Hz to 28kHz, the monitors also provide detailed coverage for critical listening.
Connect easily and work wherever you need
The iLoud Micro Monitor 2 combines flexible connectivity with a compact design, making it practical for desktop production and mobile setups. Its USB-C connection carries digital audio directly from your computer, removing the need for a separate audio interface. The same connection supports firmware updates and integration with ARC X software.
Bluetooth connectivity with AAC and SBC codec support provides another convenient option for listening to music and other content. Each speaker also features a 3/8-inch mounting thread for compatible stands, while automatic standby reduces power consumption when the system isn't being used. It's a straightforward setup for creating, editing, and everyday listening.
Features
- Compact professional studio monitor system for home studios, desktop production and mobile setups
- Redesigned acoustic system for improved clarity, deeper bass and reduced distortion
- 3-inch composite fibre mid-woofers for controlled low-frequency reproduction
- 3/4-inch silk dome tweeters with precision waveguides for detailed high frequencies
- 50W RMS bi-amplified system with 70W peak power output
- Four efficient Class-D amplifiers for clean and powerful audio performance
- Wide 49Hz to 28kHz frequency response for accurate studio monitoring
- Redesigned rear bass-reflex ports for improved bass response and reduced airflow noise
- Reinforced cabinet construction to minimise unwanted resonance and distortion
- Built-in ARC room correction for accurate monitoring in different acoustic environments
- ARC X software integration for creating personalised speaker calibration profiles
- Internal DSP stores and applies room correction without additional processing hardware
- Compatible with ARC measurement microphones for precise room calibration
- Linear-phase crossover technology for accurate stereo imaging and transient response
- 3.5kHz digital crossover for smooth frequency transitions and improved phase accuracy
- Phase coherence within 20 degrees from 220Hz to 23kHz for precise sound positioning
- USB-C digital audio connection for direct computer monitoring without an external interface
- Bluetooth connectivity with AAC and SBC codec support for convenient wireless listening
- USB-C support for firmware updates and ARC X software integration
- Compact footprint for easy placement on desks and in smaller studio spaces
- 3/8-inch mounting threads for use with compatible speaker stands
- Automatic standby mode for reduced power consumption when not in use
Specifications
- Reference sound: Flat frequency response (49 Hz – 28 kHz +/-2 dB) with precise stereo imaging, no phase distortion and smooth in-room dispersion
- Built-in ARC calibration: Automatic room correction optimizes the sound to any space in seconds (ARC microphone included)
- ARC X ecosystem: Full integration with ARC X software for room correction, 6-band EQ tuning, custom voicing and immersive audio setups
- Versatile connectivity: Analog RCA, digital USB-C and Bluetooth audio inputs
- Compact & flexible: Integrated isolation tilt-base and standard 3/8" mic stand mounts
- Technical specifications:
- Type: 2-way bi-amped, digitally controlled studio monitors
- LF driver: 3" composite fiber mid woofer
- HF driver: 3/4" silk dome tweeter with precision waveguide
- Acoustic design: Rear ported bass reflex
- Number of internal amplifiers: 4
- Amplifiers type: High efficiency, low distortion Class-D
- Total system power: 50W RMS continuous, 70W peak
- Crossover type: Digital, linear phase, 2.75 kHz 6th order
- Frequency response: 49 Hz to 28 kHz +/-2 dB
- Low frequency extension: 40 Hz -10 dB
- Phase response: System remains coherent within +/-20° from 220 Hz to 23 kHz
- Max SPL continuous: Continuous long term, free field, 1 m, two speakers, ANSI-2034 pink noise: 94 dB
- Max SPL peak: Peak, free field, two speakers, ANSI-2034 pink noise: 105 dB
- Analog input sensitivity: A -9 dBu input signal generates 80 dB SPL @1 m, one speaker
- Software and calibration:
- Software control: The speaker completely integrates with the ARC X ecosystem
- Room correction: Yes, built-in, calibrates via ARC X software and stores calibration on the speaker for standalone operation
- Room correction microphone: Included
- Voicing: Emulates popular studio monitors and listening systems via ARC X software
- Acoustic tuning: 6-band EQ, operated via ARC X and stored on the speaker
- Immersive audio: Yes, integrates with ARC X for fully automated immersive setups calibration and tuning
- Audio inputs:
- RCA analog (-10 dBV)
- USB-C digital input
- Bluetooth
- Connections and power:
- Speakers link: 4-pin MINI DIN 2 meters link cable included
- PSU: 24V, 2.5A (60W) included
- Dimensions & weight:
- Dimensions: 98 x 182 x 140 mm
- Weight: 2.06 kg (pair)
- In the box:
- 1 x active iLoud Micro Monitor 2
- 1 x passive iLoud Micro Monitor 2
- 1 x ARC measurement microphone & clamp
- 1 x USB-C to USB-C cable
- 1 x speaker link cable
- 1 x power supply & mains cable
- Product Code: IP-ILOUD-MM2-UPG