Full Description
View Full Description
Hear every detail with three-way accuracy
It is critical to hear what is happening across the frequency spectrum when making important mix decisions. With the KH 310 II, it has a dedicated three-way driver arrangement, with an 8.25-inch woofer, 3-inch midrange driver, and 1-inch tweeter, so you have a handle on their respective frequency ranges. This lets you determine individual instruments, identify problem frequencies, and make precise tonal adjustments. Neumann has also refined the midrange performance inherited from the original KH 310, so you can assess vocals and instruments with more accuracy. The frequency response linearity is within ±0.6 dB between 100 Hz and 10 kHz, so you can make EQ and balance decisions based on a neutral, consistent sound.
Keep bass tight and transients clearly defined
The KH 310 II has a sealed cabinet design that provides controlled low-frequency reproduction and precise transient response. Unlike a bass-reflex enclosure, it has a closed-box construction, designed to maintain tight, responsive bass, making it easier to judge kick drums, bass guitars, and other low-frequency elements in your mix. The newly improved woofer improves performance at higher excursions, while limited group delay helps preserve the timing and definition of fast transients. Additionally, the monitor provides a frequency response extending down to 29 Hz (±6 dB), bringing access to deeper bass information. Whether adjusting low-end dynamics or checking the relationship between kick and bass, those changes are easier to recognise.
Work confidently with greater headroom
Get up to 121.4 dB maximum SPL at one metre, an increase of approximately 5 dB over the original KH 310. Greater headroom helps the monitor reproduce sudden peaks and dynamic changes accurately, bringing less distortion when your mixes become more complex. Each monitor uses 585 W of Class D amplification, spread across ts three drivers with 300 W for the woofer, 160 W for the midrange, and 125 W for the tweeter. Combined with better phase response and reduced distortion, this provides consistent monitoring across different listening levels. This is especially helpful while assessing compression, dynamics, and fine details during longer mixing or mastering sessions.
Adapt your monitoring to your studio
Regardless of how accurate your studio monitor is, it can still be impacted by the acoustics of your room. As such, the KH 310 II includes an integrated DSP and compatibility with Neumann's MA 1 Automatic Monitor Alignment system (sold separately). With the MA 1 measurement microphone and software, it lets you optimise the monitors' frequency and phase response to suit your listening environment. Once calibrated, the settings are stored directly in the monitor, so you don't need to keep correction software running in the background. Analogue XLR connections and digital AES3id connectivity via 75-ohm BNC makes it even easier to integrate. The optional MA 1 calibration, recommended listening distance of 1 to 2.5 metres, and support for larger immersive monitoring configurations, fits into a variety of professional studio setups.
Specifications
Acoustic Performance
- Frequency Response (±6 dB): 29 Hz – 21 kHz
- Maximum SPL at 1 m: 121.4 dB
- Recommended Listening Distance: 1.0 – 2.5 m
Drivers
- Woofer: 8.25-inch
- Midrange Driver: 3-inch
- Tweeter: 1-inch
Amplification
- Total Amplifier Power: 585 W per monitor
- Woofer Amplifier: 300 W
- Midrange Amplifier: 160 W
- Tweeter Amplifier: 125 W
DSP and Room Correction
- Room Alignment: Frequency and phase correction
- Calibration: Neumann MA 1 Automatic Monitor Alignment
- Calibration Storage: Internal DSP memory
- Calibration Latency: Zero additional latency
Dimensions
- Dimensions (H x W x D): 253 x 383 x 292 mm